Start here
Diagnose it by the sound
Five sounds, five different problems. Work out which one yours is making and you'll know whether this is a free fix, a service call, or a drain job that has nothing to do with the disposal.
- What it means
- The motor has power and the grinding plate is jammed — usually a bone, a fruit pit, a utensil, or fibrous food wrapped around the mechanism.
- What to do
- Switch it off immediately. With power isolated at the wall and breaker, use the hex wrench to free it, then remove the debris with tongs.
- When to call
- If it won't free up, if it frees and then jams again, or if it hums again after resetting.
- What it means
- No power reaching the motor. Most often a tripped reset button on the unit, a tripped breaker, or a failed wall switch. Sometimes a burned-out motor.
- What to do
- Press the reset button on the underside of the unit, check the breaker, and try again.
- When to call
- If the reset trips again straight away, or nothing happens at all after checking both.
- What it means
- Something hard is in there — bottle caps, cutlery, small bones, broken glass. Occasionally a broken impeller lug.
- What to do
- Switch it off immediately and don't run it again. Every second with metal inside damages the grinding components.
- When to call
- Once you've isolated power. If you can see and safely retrieve the object with tongs, try — otherwise leave it.
- What it means
- The disposal is probably fine and the drain line beyond it is blocked, usually with grease and food buildup.
- What to do
- Check whether the other side of a double sink is also slow. If it is, the problem is definitely the line, not the unit.
- When to call
- This is a drain clearing job rather than a disposal repair — worth saying so when you book.
- What it means
- Loose mounting hardware, or an internal imbalance from damage.
- When to call
- Soon. It stresses the drain connections it's attached to, which turns one problem into two.
Try these first
The two free fixes
We'd rather you tried these than paid us to.
On the underside of nearly every unit, usually red or black. Switch off at the wall, press it firmly until it clicks, then try again. A meaningful share of completely dead disposals need nothing more than this.
Most disposals have a hex socket in the centre of the base, and most ship with a small wrench for it. With power off at the wall and the breaker, insert the wrench and work it back and forth to rotate the plate and break the jam free. Then clear the debris with tongs, restore power, and press reset.
The silent fault
Leaks make no sound — location decides everything
A leaking disposal is the one fault the noise won't tell you about, and where it's leaking from determines whether it's a small repair or a new unit.
If you find water in the cabinet: dry everything, run the unit briefly, and note where the water reappears. That single observation tells us most of what we need.
Why Eustis calls us
What you get when you call AquaFix Plumbing
We'll tell you it was the reset button
If that's all it was, that's what you'll hear. Billing for a button press is a fast way to never be called again.
We check the drain before condemning the unit
Slow drainage blamed on a disposal is frequently a blocked line beyond it. Replacing a working unit doesn't fix that, and it's an expensive way to find out.
Honest economics on replacement
Disposals aren't expensive units. When the repair costs more than replacing, we'll say so rather than quietly doing the bigger job.
Licensed, insured, background-checked
Working on both the plumbing and the electrical connections properly.
Our services
Garbage disposal services in Eustis, FL
Jam clearing & object removal
Freeing seized units, retrieving what caused it, and checking the grinding components for damage afterward.
Motor & electrical diagnosis
Reset faults, switch failures, and wiring problems — and confirming whether a motor has genuinely failed before anyone buys a new unit.
Leak repair
Sink flange reseating, dishwasher hose replacement, discharge tube and gasket repair, and mounting hardware.
Drain & trap connection repair
The plumbing the disposal attaches to — P-traps, discharge piping, and the double-sink connection — where the fault frequently actually lives.
Dishwasher connection repair
Including the knockout plug problem, drain hose replacement, and correcting improper connections left by a previous install.
Odour treatment & chamber cleaning
Deep cleaning of the grinding chamber and the underside of the splash guard — the part nothing else reaches and where the smell usually originates.
Disposal replacement
Removal and replacement with the drain and electrical connections done properly rather than reused as found.
New disposal installation
Adding a disposal where there wasn't one, including drain modifications and electrical requirements.
Root causes
What actually kills disposals
- Hard objects. Bones, fruit pits, and the things that fall in by accident — cutlery, bottle caps, glass. The leading cause of jams and impeller damage.
- Fibrous foods. Celery, corn husks, artichokes, onion skins. The strands wrap around the mechanism instead of being cut by it.
- Starchy foods. Potato peels, rice, pasta. They form a paste that clogs the chamber and the line beyond. A little is fine; a bowlful isn't.
- Grease. Doesn't hurt the unit directly — it coats the discharge pipe and creates the slow-drain problem that gets blamed on the disposal.
- Coffee grounds. Pass through fine, then settle as sediment in the trap and drain line.
- Overloading. Feeding too much at once, or faster than it can clear, overheats the motor and trips the reset.
- Running it dry. Water carries ground material out of the chamber. Without enough of it, residue stays in the unit and the pipe.
- Age and corrosion. Units generally last somewhere around eight to fifteen years. Shells corrode from the inside, and once perforated, the unit is finished.
- Poor installation. Loose mounting, improper drain connections, and knockout plugs left in place produce faults that look like unit failure but aren't.
The decision
Repair or replace
One thing worth checking: if the original was undersized for your household, replacing like-for-like repeats the problem. A unit tripping constantly under ordinary use may simply be too small for how you cook.
How it works
Our process
-
Call
Tell us what sound it makes — or doesn't — and whether you've tried the reset or the hex key. It saves diagnostic time and sometimes ends the call happily.
-
Isolate and diagnose
Power isolated, then the unit, the electrical supply, the drain connections, and the line beyond all checked. Separating a disposal fault from a drain fault comes first.
-
Quote
Scope and price before work starts, with replacement cost alongside repair cost where both are realistic.
-
Repair or replace
Done on the visit in most cases — our vehicles carry common parts and standard replacement units.
-
Test
Run under load, check every connection for leaks, confirm the dishwasher drains correctly if it's connected, and clear the work area.
Getting more from it
Habits that extend its life
- Cold water, not hot. Cold keeps fats solid so they grind up and flush through. Hot water melts them into a liquid that re-solidifies further down the pipe.
- Keep the water running afterward. Ten to twenty seconds after the grinding stops clears the chamber and pushes material through the line.
- Feed it gradually. Small amounts with water running, rather than filling the chamber and switching on.
- Keep the problem foods out. Fibrous vegetables, large quantities of starch, bones, pits, and grease belong in the bin.
- Clean it properly. Ice cubes scour the chamber. Scrub the underside of the splash guard — that's where odours live and where nothing else reaches.
- Run it regularly. Units left idle for long periods can seize and corrode.
- Don't ignore repeated resets. That's the unit warning you before it fails.
Commercial
Commercial garbage disposal repair
We service disposals for restaurants, cafés, commercial kitchens, and multi-unit residential buildings across Eustis.
Commercial units are larger, run continuously rather than in batches, and usually tie into grease management systems. A failure in a working kitchen halts prep, and in food premises it can raise compliance issues alongside the disruption.
Worth checking before you buy equipment: some jurisdictions restrict or prohibit food waste disposals in commercial kitchens, and grease interceptor requirements vary locally. If you're installing rather than repairing, confirm what applies to your premises first.
Pricing
What affects the cost
- The fault — a jam or reset issue versus a leaking flange or failed motor.
- Repair or replacement — and whether drain connections need reworking either way.
- Unit size — larger, higher-horsepower units cost more to replace.
- Drain work — where the real problem is in the piping rather than the disposal.
- Electrical work — switch faults and wiring issues add scope.
- Access — cramped cabinets and awkward plumbing take longer.
- Commercial equipment — larger units and grease system connections differ from residential.
- After-hours service — different rates outside standard scheduling.
You'll have the price before work begins.
Service area
Areas we serve near Eustis
AquaFix Plumbing proudly serves Eustis, FL and the surrounding neighborhoods, repairing and replacing residential and commercial garbage disposals throughout the area. Unsure whether you're in range? Call and ask.
Questions
Frequently asked questions
Can I put my hand in to clear it?
No. Not switched off, not for a second. Power off at the wall and the breaker, then use tongs or pliers.
My disposal hums but doesn't turn. What is that?
It's jammed — the motor has power but can't rotate. Switch it off promptly, cut the breaker, and try freeing it with the hex wrench. Don't leave it humming.
Where's the reset button?
Underside of the unit, usually red or black. Switch off at the wall first, press until it clicks, then try again.
My disposal is leaking. Can it be repaired?
Depends where from. Flange, hose, and discharge connections are repairable. A leak from the body of the unit means the shell has corroded through, and that unit needs replacing.
How much does garbage disposal repair cost in Eustis?
It depends on the fault and whether repair or replacement makes more sense. You'll get the price before work starts, with both numbers where both apply.
Hot or cold water when running it?
Cold. It keeps grease solid so it grinds and flushes. Hot water liquefies it and lets it harden further down the line.
What shouldn't go down it?
Bones, pits, grease, coffee grounds, fibrous vegetables like celery and corn husks, and large quantities of starchy waste.
Why does it smell?
Residue in the grinding chamber and on the underside of the splash guard, which almost nobody cleans. Scrubbing that solves what air fresheners don't.
The sink drains slowly but the disposal runs fine. What's wrong?
Most likely the drain line beyond the unit, blocked with grease and food buildup. That's a drain cleaning job, not a disposal repair.
How long should a disposal last?
Generally eight to fifteen years, depending on use and what's gone through it.
My dishwasher stopped draining after a new disposal was fitted.
Often the knockout plug at the dishwasher inlet wasn't removed during installation. Quick to fix once identified.
Is it worth repairing an old unit?
Jams, resets, and connection leaks are worth repairing. Motor and shell failures usually aren't, because disposals are inexpensive enough that a major repair exceeds replacement.
Can you install one where there isn't a disposal now?
Yes, including the drain modifications and electrical requirements. We'll confirm what your setup needs.
Listen to it, then call
Humming means jammed. Silence means power. Grinding means something hard is in there. Slow drainage usually means the disposal is fine and the pipe isn't.
AquaFix Plumbing diagnoses the actual fault, checks the drain line while we're there, and quotes before starting — including the times when the answer costs you nothing.