The most useful thing on this page
Where the money actually goes
Tankless quotes vary wildly between properties. Here's what's in one, and roughly how much each line tends to move the total.
Capacity, fuel type, and condensing or non-condensing. Often not the biggest line on the quote, which is the whole point of this section.
Tankless units fire far harder than tanks, and existing piping is frequently undersized for that demand. Sometimes a new run from the meter; occasionally a meter upgrade too. Distance from meter to unit drives this directly — which is why we ask about it before quoting.
Gas units need power for controls and ignition — usually minor. Electric whole-home units need substantial dedicated circuits, and if the panel or service can't support them, that becomes a panel or service upgrade and changes the entire economics.
Dedicated venting in the material the unit requires, with terminations placed to meet clearance rules from windows, doors, and intakes. A short side-wall run is inexpensive; a long route through a finished house is not.
Condensing units produce acidic condensate needing proper drainage and sometimes neutralisation. Cheap where a drain is nearby, less so where it isn't.
Disconnection, drain-down, and disposal.
Required in most areas, covering gas, venting, and plumbing.
Pump and possibly a dedicated return line, if you want to cut the wait at distant fixtures.
Two properties can want the identical unit and receive quotes that differ substantially — and it'll be almost entirely these lines, not the equipment. That's why we assess before pricing rather than quoting off a model number.
The upside
What tankless genuinely does well
Hot water that doesn't run out
No tank to empty. The limit becomes flow rate rather than a finite volume, so back-to-back showers stop being a scheduling exercise.
No standby loss
A tank keeps stored water hot around the clock whether anyone uses it or not. Tankless fires only on demand.
Space back
Wall-mounted, so the footprint a tank occupied is returned — meaningful in a small utility room or closet.
Longer service life
Commonly around twenty years or more with proper maintenance, against roughly eight to twelve for a typical tank. Components are generally serviceable rather than the whole unit being disposable.
No stored volume to release
A failed tank empties itself onto your floor. Tankless removes that particular risk.
Setting expectations
What tankless isn't
Six things worth knowing first
- It isn't unlimited water. "Endless" refers to duration, not simultaneous demand. A unit delivers a set flow at a set temperature rise — exceed it with two showers and a dishwasher on a cold morning and the temperature drops. Sizing is what makes this a non-issue.
- It isn't instant. Tankless doesn't shorten the pipe run to a distant bathroom, and burner ignition adds a moment. Recirculation fixes it, at extra cost.
- It isn't maintenance-free. Descaling is required, annually or more often in hard water. Skipping it is the leading cause of tankless underperformance and shortened life.
- It isn't seamless in every scenario. Turn hot water off and quickly back on and you may get a short slug of cool water as the unit re-fires — the "cold water sandwich." Normal, mildly irritating, reduced by some models.
- It isn't always quick to pay back. Standby loss disappears, but the payback horizon depends on your usage, energy rates, and how much infrastructure the install required. In a low-usage household it can be long.
- It may not work with very low flows. A trickle might not trigger the burner.
Fuel type
Gas or electric?
Getting it right
Sizing: two numbers that matter
Get this wrong and you'll experience exactly the problem tankless is meant to solve.
Undersized means lukewarm water whenever demand overlaps. Oversized means paying for capacity and infrastructure you'll never draw on.
Why Sunset calls us
What you get when you call AquaFix Plumbing
One number, including the infrastructure
Unit, gas, venting, electrical, condensate, removal, permits. Quoted together, before we start. No discovering the gas line upgrade on day two.
We'll say when tankless doesn't suit your property
Some houses make it expensive for reasons that have nothing to do with the equipment. You should hear that before you've committed to anything.
Service valves as standard
Because the alternative is charging you to cut into pipework in three years to do routine maintenance.
Licensed, insured, background-checked
Working to permit and inspection requirements on gas, venting, and plumbing.
Our services
Tankless services in Sunset, FL
Feasibility assessment
Gas capacity, vent route, electrical service, and location — established before any equipment conversation.
Sizing & selection
Flow rate and temperature rise matched to your household, with gas or electric and condensing or non-condensing recommended on your specifics.
Full installation
Mounting, water connections, gas or electrical supply, venting, and condensate drainage.
Gas line upgrades
Larger supply runs where existing piping can't feed the unit's firing rate.
Venting installation
Correct material and routing, with compliant terminations.
Tank-to-tankless conversion
Removal and disposal of the existing heater and conversion of the space and connections.
Recirculation systems
Reducing wait times at distant fixtures, via built-in recirculation or a dedicated return line.
Service valve installation
Isolation valves fitted at install so the unit can be descaled without cutting pipe later. Fitted as standard — retrofitting costs more than doing it once.
Point-of-use units
Small electric units for remote fixtures, additions, workshops, and outbuildings.
Descaling & servicing
Annual maintenance to protect the heat exchanger and keep performance where it should be.
On the day
What the installation involves
- Location. Wall-mounted, with clearance around it, a viable vent route, and access to gas or power. Interior utility spaces, garages, and some exterior installations all work depending on model and climate.
- Gas supply. Line sized to the unit's firing rate, with a new run from the meter where existing pipe is undersized.
- Venting. To the manufacturer's specification, with clearances observed at the termination.
- Water connections. Supply and outlet, with isolation and service valves for future maintenance.
- Condensate. Drainage and, in some installs, neutralisation.
- Electrical. Controls and ignition on gas units; dedicated circuits sized to the model on electric.
- Permits and inspection. Handled by us, with documentation to you at the end.
- Timeline. A straightforward swap in a property with adequate gas and a workable vent route is usually a day. Gas line upgrades, awkward venting, or electrical work extend it.
How it works
Our process
-
Site assessment
Gas, venting, electrical, and location, plus a conversation about how your household actually uses hot water.
-
Sizing
Flow rate and temperature rise calculated against your fixtures and local inlet conditions, with a specific recommendation and the reasoning.
-
One written quote
Everything the job needs, in one number, before anything is ordered.
-
Permits & scheduling
Permits pulled, working window agreed, and you're told how long you'll be without hot water.
-
Installation
Old unit removed, new unit mounted and connected, venting and supply completed, service valves fitted.
-
Commissioning & walkthrough
Temperature set, tested under load across multiple fixtures, combustion and venting confirmed on gas units, and a walkthrough of controls, error codes, and maintenance.
The honest answer
Should you actually switch?
And worth asking either way: would a larger or higher-efficiency tank solve the problem? If you're running out of hot water because the tank is undersized rather than because tanks are the wrong technology, that's a much cheaper fix. We'll tell you when that's the honest answer.
Upkeep
Maintaining a tankless unit
- Descale annually, more often with hard water. Scale on the heat exchanger costs you flow, efficiency, and years of life. If your water is hard, treating it ahead of the unit is worth costing out.
- Keep service valves accessible so flushing never requires cutting pipe.
- Clean the inlet filter screen. Sediment restricts flow and triggers errors.
- Check the vent terminal for obstruction, nesting, and clearance, especially after landscaping or building work.
- Log error codes rather than resetting past them. Repeats mean something.
Commercial
Commercial tankless installation
We install tankless systems for restaurants, cafés, salons, gyms, hotels, offices, and multi-unit residential buildings across Sunset.
Commercial applications frequently run multiple units in series to meet peak demand, which also provides redundancy — one unit down doesn't mean cold water. Sizing is less forgiving here, since peak simultaneous demand in a kitchen or salon is high and concentrated.
Gas capacity, venting, and permits scale up accordingly, and food premises often have hot water temperature requirements tied to health compliance. We assess demand and schedule installation around operating hours.
Service area
Areas we serve near Sunset
AquaFix Plumbing proudly serves Sunset, FL and the surrounding neighborhoods, installing and servicing residential and commercial tankless water heaters throughout the area. Unsure whether you're in range? Call and ask.
Questions
Frequently asked questions
Why is the quote so much higher than the unit price online?
Because a tankless heater needs gas capacity, dedicated venting, and sometimes electrical work that a tank didn't. That's the honest answer, and it's why we assess before quoting.
How much does tankless installation cost in Sunset?
It varies more than almost any plumbing job, because the infrastructure requirements differ so much property to property. Gas line and venting frequently cost as much as the unit. You'll get one written quote covering all of it.
Will I need a bigger gas line?
Frequently. Tankless units fire much harder than tanks and existing piping is often undersized. It's the first thing we check.
Do I really get unlimited hot water?
Unlimited in duration, not in volume. The unit delivers a set flow at a set temperature rise. Correct sizing is what makes it feel unlimited.
Can I reuse my existing vent?
Generally no. Tankless requires its own venting, in specific materials, to the manufacturer's spec.
Is electric tankless viable for a whole house?
Sometimes, but it needs substantial electrical capacity — often more than an older service provides. When a panel or service upgrade is needed, gas usually wins on total cost. Electric is excellent for point-of-use.
How long do they last?
Often twenty years or more with proper maintenance, versus roughly eight to twelve for a tank. Descaling is a major factor in reaching that.
What's the cold water sandwich?
A brief slug of cool water when hot is turned off and quickly back on, as the unit re-fires. Normal, and reduced by some models and by recirculation.
Do tankless units need servicing?
Yes — annual descaling, more with hard water, plus inlet filter cleaning and vent checks. Skipping it is the main cause of premature performance loss.
Will it save me money?
It removes standby loss, so savings track your usage and rates. Payback also depends on how much infrastructure your install required. We'll give you a realistic picture rather than a headline figure.
Why does hot water still take ages to reach my bathroom?
Distance from unit to fixture, which tankless doesn't change. Recirculation is the fix.
Can it be installed outdoors?
Some models are built for exterior installation. Suitability depends on model and climate — we'll advise.
Should I switch, or just replace my tank?
Depends whether you're actually running out of hot water, what infrastructure your property needs, and how long you're staying. Sometimes a larger tank is the better value, and we'll say so.
Price the job, not the box
The unit is the easy decision. Whether tankless makes sense at your property comes down to gas capacity, vent route, and electrical — and those answers are specific to your building, not to the technology.
AquaFix Plumbing assesses all three, sizes to how you actually use hot water, and quotes the whole job in one number.